Oxidation-Reduction Reactions - AP Chemistry
Card 1 of 454
What is the coefficient on sulfur dioxide if the following redox reaction is balanced in an acidic solution?

What is the coefficient on sulfur dioxide if the following redox reaction is balanced in an acidic solution?
Tap to reveal answer
Balancing redox reactions involves the following steps:
1. Divide the reaction into oxidation and reduction half reactions and balance all atoms that are not oxygen and hydrogen:


2. Balance the oxygens by adding water molecules on the opposite side of the reactions:


3. Balance the hydrogens by adding protons to the opposite side of the equation:


4. Add electrons in order to equal the charges on both sides of the equation:


5. In order to make the electron exchange equal in each half step, we must multiply the top half reaction by 3:


6. Add up the reactants and products while cancelling out substances on opposite sides of the reactions. For example: we will cancel the 6 water molecules as reactants and be left with only one water molecule as a product. In addition, only 2 protons will be left on the reactant's side after canceling the 12 from the product's side.

In the balanced redox reaction, the coefficient on sulfur dioxide is 3.
Balancing redox reactions involves the following steps:
1. Divide the reaction into oxidation and reduction half reactions and balance all atoms that are not oxygen and hydrogen:
2. Balance the oxygens by adding water molecules on the opposite side of the reactions:
3. Balance the hydrogens by adding protons to the opposite side of the equation:
4. Add electrons in order to equal the charges on both sides of the equation:
5. In order to make the electron exchange equal in each half step, we must multiply the top half reaction by 3:
6. Add up the reactants and products while cancelling out substances on opposite sides of the reactions. For example: we will cancel the 6 water molecules as reactants and be left with only one water molecule as a product. In addition, only 2 protons will be left on the reactant's side after canceling the 12 from the product's side.
In the balanced redox reaction, the coefficient on sulfur dioxide is 3.
← Didn't Know|Knew It →
For the following unbalanced redox reaction, how many electrons are transferred and which chemical species is being oxidized?

For the following unbalanced redox reaction, how many electrons are transferred and which chemical species is being oxidized?
Tap to reveal answer
To begin, we will need to separate the given reaction into the two half-reactions by identifying changes in oxidation number. In this case, mercury (Hg) and phosphorus (P) show a change in oxidation number. Mercury begins with an oxidation number of zero, and ends with an oxidation number of
. Phosphorus begins with an oxidation number of
and ends with an oxidation number of
. Note that the oxidation numbers for fluorine and iodine reamain constant at
for each.
Now we can begin to look at the half-reactions.


Balance the atoms.


Now balance the electrons. We know that each mercury atom loses one electron and each fluorine atom gains one electron.


We can see that two electrons are tranferred. To identify the element being oxidized, we must find the element that is losing electrons. In this case, mercury is being oxidized.
To begin, we will need to separate the given reaction into the two half-reactions by identifying changes in oxidation number. In this case, mercury (Hg) and phosphorus (P) show a change in oxidation number. Mercury begins with an oxidation number of zero, and ends with an oxidation number of . Phosphorus begins with an oxidation number of
and ends with an oxidation number of
. Note that the oxidation numbers for fluorine and iodine reamain constant at
for each.
Now we can begin to look at the half-reactions.
Balance the atoms.
Now balance the electrons. We know that each mercury atom loses one electron and each fluorine atom gains one electron.
We can see that two electrons are tranferred. To identify the element being oxidized, we must find the element that is losing electrons. In this case, mercury is being oxidized.
← Didn't Know|Knew It →
Oxidation is the of electrons, reduction is the of electrons.
Oxidation is the of electrons, reduction is the of electrons.
Tap to reveal answer
An oxidation-reduction (redox) reaction is a reaction where electrons are transferred between two substances. When an atom is oxidized, it is called the reducing agent, and it loses a number of electrons. Similarly, a reduced atom is called the oxidizing agent, and gains the same number of electrons. A popular mnemonic to help remember is OIL RIG, or Oxidation is Loss of electrons, Reduction is Gain of electrons.
An oxidation-reduction (redox) reaction is a reaction where electrons are transferred between two substances. When an atom is oxidized, it is called the reducing agent, and it loses a number of electrons. Similarly, a reduced atom is called the oxidizing agent, and gains the same number of electrons. A popular mnemonic to help remember is OIL RIG, or Oxidation is Loss of electrons, Reduction is Gain of electrons.
← Didn't Know|Knew It →
The following ReDox reaction takes place in acidic solution:
Fe2+ + Cr2O72– → Fe3+ + Cr3+
What is the sum of coefficients in this redox reaction?
The following ReDox reaction takes place in acidic solution:
Fe2+ + Cr2O72– → Fe3+ + Cr3+
What is the sum of coefficients in this redox reaction?
Tap to reveal answer
When you balance the redox reaction in acidic conditons, there are 6Fe2+, 1 Cr2O72–, 14 H+, 6 Fe3+, 2 Cr3+, and 7 H2O. Don't forget to add the 1 in front of the Cr2O72–
When you balance the redox reaction in acidic conditons, there are 6Fe2+, 1 Cr2O72–, 14 H+, 6 Fe3+, 2 Cr3+, and 7 H2O. Don't forget to add the 1 in front of the Cr2O72–
← Didn't Know|Knew It →
For the following unbalanced redox reaction, how many electrons are transferred and which chemical species is being oxidized?

For the following unbalanced redox reaction, how many electrons are transferred and which chemical species is being oxidized?
Tap to reveal answer
To begin, we will need to separate the given reaction into the two half-reactions by identifying changes in oxidation number. In this case, mercury (Hg) and phosphorus (P) show a change in oxidation number. Mercury begins with an oxidation number of zero, and ends with an oxidation number of
. Phosphorus begins with an oxidation number of
and ends with an oxidation number of
. Note that the oxidation numbers for fluorine and iodine reamain constant at
for each.
Now we can begin to look at the half-reactions.


Balance the atoms.


Now balance the electrons. We know that each mercury atom loses one electron and each fluorine atom gains one electron.


We can see that two electrons are tranferred. To identify the element being oxidized, we must find the element that is losing electrons. In this case, mercury is being oxidized.
To begin, we will need to separate the given reaction into the two half-reactions by identifying changes in oxidation number. In this case, mercury (Hg) and phosphorus (P) show a change in oxidation number. Mercury begins with an oxidation number of zero, and ends with an oxidation number of . Phosphorus begins with an oxidation number of
and ends with an oxidation number of
. Note that the oxidation numbers for fluorine and iodine reamain constant at
for each.
Now we can begin to look at the half-reactions.
Balance the atoms.
Now balance the electrons. We know that each mercury atom loses one electron and each fluorine atom gains one electron.
We can see that two electrons are tranferred. To identify the element being oxidized, we must find the element that is losing electrons. In this case, mercury is being oxidized.
← Didn't Know|Knew It →
How many electrons are involved in the following reaction?

How many electrons are involved in the following reaction?
Tap to reveal answer

The common factor between 2 e- and 5 e- is 10. Therefore the number of electrons involved is 10 e-.
The common factor between 2 e- and 5 e- is 10. Therefore the number of electrons involved is 10 e-.
← Didn't Know|Knew It →
How many electrons are involved in the following reaction?

How many electrons are involved in the following reaction?
Tap to reveal answer

The common factor between 1 e- and 5 e- is 5. Therefore the number of electrons involved is 5 e-.
The common factor between 1 e- and 5 e- is 5. Therefore the number of electrons involved is 5 e-.
← Didn't Know|Knew It →
What is the balanced coefficient on OH- for the following reaction:
(under basic conditions)
What is the balanced coefficient on OH- for the following reaction:
(under basic conditions)
Tap to reveal answer

Add them together:

Simplify:

Add Hydroxides to each side to counter H+.

Simplify:

Add them together:
Simplify:
Add Hydroxides to each side to counter H+.
Simplify:
← Didn't Know|Knew It →
What is the sum of all the balanced coefficients in the following reaction:
(basic conditions)
What is the sum of all the balanced coefficients in the following reaction:
(basic conditions)
Tap to reveal answer

Add the equations together

Simplify

Add 2 OH- to each side to cancel out the H+.

Simplify:

Add the equations together
Simplify
Add 2 OH- to each side to cancel out the H+.
Simplify:
← Didn't Know|Knew It →
What is the balanced equation when heptane is combusted?
What is the balanced equation when heptane is combusted?
Tap to reveal answer
Heptane: C7H16. Combustion is when a molecule reacts with O2 and the products are CO2 and H2O. Balancing gives 7 CO2, 8 H2O, 1 heptane, and 11 O2
Heptane: C7H16. Combustion is when a molecule reacts with O2 and the products are CO2 and H2O. Balancing gives 7 CO2, 8 H2O, 1 heptane, and 11 O2
← Didn't Know|Knew It →
Which of the following reactions has the most exothermic heat of reaction?
Which of the following reactions has the most exothermic heat of reaction?
Tap to reveal answer
The longer the hydrocarbon chain, the greater the amount of combustion products (CO2 and H20) generated. Branched molecules such as isopropane and isobutane are more difficult to combust than their straight-chain counterparts.
The longer the hydrocarbon chain, the greater the amount of combustion products (CO2 and H20) generated. Branched molecules such as isopropane and isobutane are more difficult to combust than their straight-chain counterparts.
← Didn't Know|Knew It →
Which of the following conditions would describe a combustion reaction?
Which of the following conditions would describe a combustion reaction?
Tap to reveal answer
An exothermic reaction will have a negative
value, indicating that it releases heat. Conversely, an endothermic reaction will have a positive
value, indicating a consumption of heat.
A combustion reaction releases heat; thus it must have a negative
value and be exothermic.
Exergonic reactions have a negative
value, indicating spontaneity, while endergonic reactions are non-spontaneous. While most combustion reactions will be non-spontaneous, it is impossible to draw this conclusion for certain without knowing more about the reaction. The only thing we know for certain is that heat is released, and the reaction is exothermic.
An exothermic reaction will have a negative value, indicating that it releases heat. Conversely, an endothermic reaction will have a positive
value, indicating a consumption of heat.
A combustion reaction releases heat; thus it must have a negative value and be exothermic.
Exergonic reactions have a negative value, indicating spontaneity, while endergonic reactions are non-spontaneous. While most combustion reactions will be non-spontaneous, it is impossible to draw this conclusion for certain without knowing more about the reaction. The only thing we know for certain is that heat is released, and the reaction is exothermic.
← Didn't Know|Knew It →

For the redox reaction shown, which of the following half reactions occurs in the anode?
For the redox reaction shown, which of the following half reactions occurs in the anode?
Tap to reveal answer
Recall that oxidation always occurs at the anode (in both the electrochemical and galvanic cells).
loses two electrons in this case to become
. The presence of
is hinted by the ionic compound
.
Recall that oxidation always occurs at the anode (in both the electrochemical and galvanic cells). loses two electrons in this case to become
. The presence of
is hinted by the ionic compound
.
← Didn't Know|Knew It →
When is the oxidation number of H (-1)?
When is the oxidation number of H (-1)?
Tap to reveal answer
We typically think of Hydrogen as having an oxidation number of +1. However when it is bonded to a less electronegative element such as Na it is actually assigned an oxidation number of -1.
We typically think of Hydrogen as having an oxidation number of +1. However when it is bonded to a less electronegative element such as Na it is actually assigned an oxidation number of -1.
← Didn't Know|Knew It →
What is the oxidation number of Cr, S, and Fe in the following substances: (a) K2Cr2O7 (b) H2SO4 (c) Fe2O3.
What is the oxidation number of Cr, S, and Fe in the following substances: (a) K2Cr2O7 (b) H2SO4 (c) Fe2O3.
Tap to reveal answer
(a) Since O has a –2 oxidation number and K has a +1 oxidation number (1 valence
electron it gives up), that means that Cr must have an oxidation number of +6. (b) Since H
has a +1 oxidation number and O has a –2 oxidation number, S has a +6 oxidation number.
(c) Fe has an oxidation number of +3 in order for it to have a net 0 oxidation state.
(a) Since O has a –2 oxidation number and K has a +1 oxidation number (1 valence
electron it gives up), that means that Cr must have an oxidation number of +6. (b) Since H
has a +1 oxidation number and O has a –2 oxidation number, S has a +6 oxidation number.
(c) Fe has an oxidation number of +3 in order for it to have a net 0 oxidation state.
← Didn't Know|Knew It →
Consider the following balanced equation:

What is the difference between the oxidation state of aluminum on the right side of the equation versus the left?
Consider the following balanced equation:
What is the difference between the oxidation state of aluminum on the right side of the equation versus the left?
Tap to reveal answer

On the left side of the equation,
is a solid, so its oxidation state is zero, but on the right side it is in a salt, so it is not in its zero state.
Sulfate,
, is an anionic salt, and there are three sulfate ions in each complex, yielding a net charge of -6. The two aluminum ions must have a net charge of +6, which, divided over two aluminum ions, yields an oxidation state of +3 for each aluminum ion.
The difference comes from simple subtraction:
.
On the left side of the equation, is a solid, so its oxidation state is zero, but on the right side it is in a salt, so it is not in its zero state.
Sulfate, , is an anionic salt, and there are three sulfate ions in each complex, yielding a net charge of -6. The two aluminum ions must have a net charge of +6, which, divided over two aluminum ions, yields an oxidation state of +3 for each aluminum ion.
The difference comes from simple subtraction: .
← Didn't Know|Knew It →
What is the oxidation number of manganese in
?
What is the oxidation number of manganese in ?
Tap to reveal answer

Potassium always has an oxidation state of
, while oxygen always has an oxidation state of
. Since we have four oxygens, there is a total charge of
from them.
The most important rule of oxidation numbers is that their sum must equal the charge on the molecule. In this compound, we have
.



Manganese needs to cancel out the charge from potassium and oxygen in order to give us a neutral compound.
Potassium always has an oxidation state of , while oxygen always has an oxidation state of
. Since we have four oxygens, there is a total charge of
from them.
The most important rule of oxidation numbers is that their sum must equal the charge on the molecule. In this compound, we have .
Manganese needs to cancel out the charge from potassium and oxygen in order to give us a neutral compound.
← Didn't Know|Knew It →
What is the oxidation number of chlorine in perchlorate?
What is the oxidation number of chlorine in perchlorate?
Tap to reveal answer
Perchlorate is a complex ion with the formula
.
The most important rule for oxidation number is that the sum of the oxidation states of the atoms must equal the overall molecular charge.

This compound has four oxygens, which always have a
oxidation state.


Chlorine usually has an oxidation state of
, but in this case it must balance out the oxygens.

Chlorine must be
.
Perchlorate is a complex ion with the formula .
The most important rule for oxidation number is that the sum of the oxidation states of the atoms must equal the overall molecular charge.
This compound has four oxygens, which always have a oxidation state.
Chlorine usually has an oxidation state of , but in this case it must balance out the oxygens.
Chlorine must be .
← Didn't Know|Knew It →

In the above reaction, what are the initial and final oxidation states of
?
In the above reaction, what are the initial and final oxidation states of ?
Tap to reveal answer
To determine the initial oxidation state of
, we first must realize that
has 3 oxygen atoms, each with a charge of
, for a total charge contribution of
. Furthermore, since
has no net charge, the
atoms must contribute a total charge of
to balance out the
charge coming from the oxygens. And since there are two
atoms, then each must have a charge of
.
On the product side of the reaction, notice that
is all by itself without any charge. The oxidation state of any individual atom is
.
To determine the initial oxidation state of , we first must realize that
has 3 oxygen atoms, each with a charge of
, for a total charge contribution of
. Furthermore, since
has no net charge, the
atoms must contribute a total charge of
to balance out the
charge coming from the oxygens. And since there are two
atoms, then each must have a charge of
.
On the product side of the reaction, notice that is all by itself without any charge. The oxidation state of any individual atom is
.
← Didn't Know|Knew It →
The Claus process is used in the petroleum industry to convert sulfur containing gases into solid (rhombic) sulfur. One of the reactions that takes place in this process is:

Which of the following statements is correct:
The Claus process is used in the petroleum industry to convert sulfur containing gases into solid (rhombic) sulfur. One of the reactions that takes place in this process is:
Which of the following statements is correct:
Tap to reveal answer
We have an oxidizing
and a reducing
agent, then is a red-ox reaction and the two semi reactions are:
(oxidation,
losses electrons)
(reduction,
gains electrons)
In total 32 electrons are transferred from the
to
.
We have an oxidizing and a reducing
agent, then is a red-ox reaction and the two semi reactions are:
(oxidation,
losses electrons)
(reduction,
gains electrons)
In total 32 electrons are transferred from the to
.
← Didn't Know|Knew It →