Electron Configuration - MCAT Chemical and Physical Foundations of Biological Systems

This particular configuration denotes a particle with ten total electrons. The sodium atom, with eleven electrons, is the only one listed that could not have this configuration. Ionized sodium, however, symbolized as Na+, does apply. (Be careful to distinguish neutral atoms and ions).

When determining electronic configuration, the answer is made much easier by starting with the next smallest noble gas in brackets. As a result, \[Ar\] is an appropriate way to incorporate every previous electron before argon.

After argon, vanadium has five other electrons to distribute, and because vanadium is a transitional element, it will fill its 3d subshells before filling the 4p subshells. The 4s subshell is filled first, and the last three electrons are placed into the 3d subshells.

\[Ar\]3d34s2

Were this question asking for the electronic structure of magnesium (Mg) in its ground state, would be the correct answer; however, the charge on means that the molecule shed two valence electrons to achieve a more stable orbital. Those electrons will be shed from the outermost valence shell, which in this case is the shell; therefore, is correct.

Note that the ground state of magnesium will have twelve electrons (the same as its atomic number), while the ion will have ten.

Nuclear orbitals will always fill from the innermost to the outermost subshells. Using the rule, we can approximate the order in which these orbitals will fill. Because electrons fill starting with the centermost orbitals, the electron that is closest to the nucleus will belong to the orbital that fills first.

corresponds to the principle quantum number, the first number in the given orbital location. is the azimuthal quantum number, and dictates the shape of the orbital.

5s and 3d produce the same number from the equation, but in the event of a tie we always pick the orbital with the lowest letter (s < p < d < f). The innermost orbital will be 5s.

Due to the phenomenon of half-orbital stability in the transition metals, electrons can easily move between 4s and 3d orbitals. The atom achieves greater stability from having only one atom in the 4s orbital, allowing a half-filled 3d orbital, as opposed to a full 4s orbital and four electrons in the 3d subshell.

For elements like chromium and copper, which could have valence shell configurations of 4s23d4 and _4s_23d9, respectively, an electron from the 4s orbital jumps down to the 3d orbital to harness added stability from the half-filled orbital. The given electron configuration is that of chromium.

Note that you can also solve this question by counting the electrons to determine the atomic number. In this case, the electrons add up to 24, indicating the twenty-fourth element: chromium.

Valence electrons will be housed in the outer shell (highest numbered orbital) of the electron configuration.

Calcium:

Magnesium:

Zinc:

Copper:

Arsenic:

Calcium, magnesium, and zinc all have two valence electrons in their highest energy orbital. Copper has only one valence electron. Arsenic has five total valence electrons in the fourth shell.

An atom that has a charge of has lost two electrons. The two lost are always the valence electrons, which are most easily taken from the molecule. Strontium has a normal electron configuration with 38 electrons. In shorthand notation, this would be:

Losing two valence electrons will remove the 5s electrons. This leave the configuration as:

This makes sense because krypton has a stable valence octet. Strontium is stable as an ion, meaning that it will also have an octet, allowing it to match the configuration for krypton.

Valence electrons in the d subshell can be odd because a half-filled d orbital is more stable than one with three or four electrons. While strontium, titanium, and vanadium have two electrons in their 4s orbitals, chromium has one in the 4s shell and puts five in the 3d shell.

This creates a half-filled 4s and 3d shells, which are more stable than a full 4s shell and partial 3d shell. Chromium and manganese thus have the same number of 3d electrons: five.

A neutral atom of sodium would contain eleven electrons to balance out the charge of the eleven protons in the nucleus. We are asked, however, for the configuration of a sodium ion. Sodium is an alkali metal, meaning that it will ionize by losing only one electron, gaining a charge of . By losing one electron, sodium drops from having eleven electrons to ten. We will need to select the answer that shows an electron removed form the outermost shell.

Neutral sodium:

Sodium ion:

Cobalt is a transition metal; therefore, it is found in the D block of the periodic table. A ground state cobalt atom has an electron configuration of . The last orbitals that gain or lose electrons must be either the or orbitals, since these are the orbitals with highest energy and located farthest from the nucleus.

Recall that electrons are filled from orbitals of low energy to high energy. A orbital has a lower energy than a orbital. This means that when you are filling electrons, the last orbital you fill is the orbital. When you are assigning electrons to each orbital you assign two electrons to the orbital and then the remaining seven electrons to the five orbitals; therefore, orbitals are filled last when gaining electrons.

When an element loses electrons, the first orbital that loses electrons is the outermost orbital. This occurs because the attractive force of the nucleus on the electron will be weakest in the outermost orbital (because it is farthest away from nucleus); therefore, it will be easy to pull the electron away from the nucleus. In cobalt, the outermost orbital is the orbital (because it has the highest shell number). This means that electrons will be lost from the orbital before the orbital.

Notice that the orbital that gains electron last is not the same orbital that loses electrons first. Gaining electrons is dependent on the energy of the orbital, and losing electrons is dependent on the location of the orbital. The highest energy orbital will gain electron last and the outermost orbital will lose electron first.

The question states that the element is a transition element and it only has one electron in its orbital. Recall that transition metals usually have two electrons in its orbital; however, some transition metals lose one of the electrons from their orbital and move it to one of their orbital. This occurs because of a phenomenon called half-shell stability. Half-shell stability states that an element is more stable when all the orbitals are half filled.

This is best exemplified by the transition metal chromium. The electron configuration of chromium, conventionally, would be . This means that chromium has two electrons in the orbital, one electron in four orbitals, and an empty orbital. Half-shell stability states that chromium is more stable if all five orbitals have an electron, rather than having an empty orbital; therefore, an electron from the orbital will be moved to the empty orbital to fulfill half-shell stability. This gives one electron in the orbital and one electron in each of the five orbitals.

Notice that half-shell stability is also observed in molybdenum () and tungsten (). Molybdenum will have one electron in its orbital and one electron in each of its orbitals, and tungsten will have one electron in its orbital and one electron in each of its orbitals.

The question states that the oxygen and fluorine atoms have the same electron configuration as neon. The electron configuration for neon is , with ten total electrons and eight valence electrons. To match this configuration, both the oxygen and the fluorine atom must have eight valence electrons (two in the orbital and six in the orbital).

Recall that atoms in the oxygen group have six valence electrons, whereas halogens have seven valence electrons; therefore, oxygen has six and fluorine has seven valence electrons. To reach a total of eight valence electrons (octet) the oxygen atom must have gained two electrons, giving it a charge of . Similarly, fluorine must have gained one electron, giving it a charge of . Fluorine has half the of charge of oxygen because it gained half the amount of electrons to complete its octet.

When an element loses an electron it is generally taken away from the highest electron shell. The electron configuration of iron (Fe) is . The 4s orbital is farther away from the nucleus than the 3d orbital, therefore the electron configuration of Fe+ will be .

This particular configuration denotes a particle with ten total electrons. The sodium atom, with eleven electrons, is the only one listed that could not have this configuration. Ionized sodium, however, symbolized as Na+, does apply. (Be careful to distinguish neutral atoms and ions).

When determining electronic configuration, the answer is made much easier by starting with the next smallest noble gas in brackets. As a result, \[Ar\] is an appropriate way to incorporate every previous electron before argon.

After argon, vanadium has five other electrons to distribute, and because vanadium is a transitional element, it will fill its 3d subshells before filling the 4p subshells. The 4s subshell is filled first, and the last three electrons are placed into the 3d subshells.

\[Ar\]3d34s2

Were this question asking for the electronic structure of magnesium (Mg) in its ground state, would be the correct answer; however, the charge on means that the molecule shed two valence electrons to achieve a more stable orbital. Those electrons will be shed from the outermost valence shell, which in this case is the shell; therefore, is correct.

Note that the ground state of magnesium will have twelve electrons (the same as its atomic number), while the ion will have ten.

Nuclear orbitals will always fill from the innermost to the outermost subshells. Using the rule, we can approximate the order in which these orbitals will fill. Because electrons fill starting with the centermost orbitals, the electron that is closest to the nucleus will belong to the orbital that fills first.

corresponds to the principle quantum number, the first number in the given orbital location. is the azimuthal quantum number, and dictates the shape of the orbital.

5s and 3d produce the same number from the equation, but in the event of a tie we always pick the orbital with the lowest letter (s < p < d < f). The innermost orbital will be 5s.

Due to the phenomenon of half-orbital stability in the transition metals, electrons can easily move between 4s and 3d orbitals. The atom achieves greater stability from having only one atom in the 4s orbital, allowing a half-filled 3d orbital, as opposed to a full 4s orbital and four electrons in the 3d subshell.

For elements like chromium and copper, which could have valence shell configurations of 4s23d4 and _4s_23d9, respectively, an electron from the 4s orbital jumps down to the 3d orbital to harness added stability from the half-filled orbital. The given electron configuration is that of chromium.

Note that you can also solve this question by counting the electrons to determine the atomic number. In this case, the electrons add up to 24, indicating the twenty-fourth element: chromium.

Valence electrons will be housed in the outer shell (highest numbered orbital) of the electron configuration.

Calcium:

Magnesium:

Zinc:

Copper:

Arsenic:

Calcium, magnesium, and zinc all have two valence electrons in their highest energy orbital. Copper has only one valence electron. Arsenic has five total valence electrons in the fourth shell.