Motion in One Dimension - MCAT Chemical and Physical Foundations of Biological Systems
Card 1 of 161
Suppose a ball with mass of 10kg was dropped from rest from the top of a cliff that is 80m tall. How long will it take the ball to reach the bottom of the cliff?
Suppose a ball with mass of 10kg was dropped from rest from the top of a cliff that is 80m tall. How long will it take the ball to reach the bottom of the cliff?
Tap to reveal answer
The question tells us that the initial velocity of the ball (v0) is zero and the height (d) of the cliff is 80m. Acceleration (gravity) is 10m/s2. Using the kinematics eqation 
we can solve for time.
80 = 0 + (1/2)(10)t2
80/5 = t2 = 16
t = 4s
The question tells us that the initial velocity of the ball (v0) is zero and the height (d) of the cliff is 80m. Acceleration (gravity) is 10m/s2. Using the kinematics eqation
80 = 0 + (1/2)(10)t2
80/5 = t2 = 16
t = 4s
← Didn't Know|Knew It →
If a 15kg ball takes five seconds to strike the ground when released from rest, at what height was the ball dropped?
If a 15kg ball takes five seconds to strike the ground when released from rest, at what height was the ball dropped?
Tap to reveal answer
Using the equation 
we can find the distance at which the ball was dropped. Notice that the mass of the ball does not matter in this problem. We are told that the ball is dropped from rest making, 
, thus we have 
. When we plug in our values, and assuming that acceleration is equal to gravity (10m/s2) we find that 
= 125m.
Using the equation
← Didn't Know|Knew It →
If a ball was thrown straight up at 10m/s and strikes the ground after two seconds, what maximum height did the ball reach?
If a ball was thrown straight up at 10m/s and strikes the ground after two seconds, what maximum height did the ball reach?
Tap to reveal answer
This question can be solved using multiple strategies. One strategy uses the equation 
.
vf = 0m/s
vo = 10m/s
a = -10m/s2
We use a negative acceleration because gravity is in the opposite direction of the movement of the ball. When we plug in all the values we find that d= 5m.
Another strategy uses the projectile time. In projectile motion we know that velocity is zero at the maximum height. Using only half of the projectile time, we can solve for the maximum height.
This question can be solved using multiple strategies. One strategy uses the equation
vf = 0m/s
vo = 10m/s
a = -10m/s2
We use a negative acceleration because gravity is in the opposite direction of the movement of the ball. When we plug in all the values we find that d= 5m.
Another strategy uses the projectile time. In projectile motion we know that velocity is zero at the maximum height. Using only half of the projectile time, we can solve for the maximum height.
← Didn't Know|Knew It →
A car is moving with a constant velocity of 
when it abruptly stops, applying a constant breaking acceleration of 
. Over what distance does the car come to a stop?
A car is moving with a constant velocity of
Tap to reveal answer
This problem can be easily solved using the formula, 
, and solving for 
. Our initial velocity is 
, acceleration is 
, and final velocity is 
.
The car comes to a stop after applying the breaks over 10m.
This problem can be easily solved using the formula,
The car comes to a stop after applying the breaks over 10m.
← Didn't Know|Knew It →
If an object is dropped from a height of 450 meters above Earth, what is its velocity just before impact?
If an object is dropped from a height of 450 meters above Earth, what is its velocity just before impact?
Tap to reveal answer
First calculate the time it takes to hit the ground using the equation 
.
We can plug in values (including acceleration due to gravity) and solve for t.
t = 9.49s
Next, find the final velocity with the equation 
.
First calculate the time it takes to hit the ground using the equation
We can plug in values (including acceleration due to gravity) and solve for t.
t = 9.49s
Next, find the final velocity with the equation
← Didn't Know|Knew It →
An object is shot upward from the ground at a velocity of 24m/s. How long before it hits the ground?
An object is shot upward from the ground at a velocity of 24m/s. How long before it hits the ground?
Tap to reveal answer
First find the time it takes to reach the top of its path using the equation 
, where the final velocity is 0m/s, initial velocity is 24m/s, and a is the acceleration due to gravity. Solve for time (t).
0 = 24 +(-10)t
t = 2.4s
Notice that this is only the time it takes the object to reach the top of its path, and the question asks for the time it takes the object to reach the ground. In order to find how long it takes to reach the ground simply double this time.
2.4s * 2 = 4.8 s
First find the time it takes to reach the top of its path using the equation
0 = 24 +(-10)t
t = 2.4s
Notice that this is only the time it takes the object to reach the top of its path, and the question asks for the time it takes the object to reach the ground. In order to find how long it takes to reach the ground simply double this time.
2.4s * 2 = 4.8 s
← Didn't Know|Knew It →
Two children are playing on an icy lake. Child 1 weighs 50kg, and child 2 weighs 38kg. Child 1 has a backpack that weighs 10kg, and child 2 has a backpack that weighs 5kg.
Over the course of the afternoon, they collide many times. Four collisions are described below.
Collision 1:
Child 1 starts from the top of a ramp, and after going down, reaches the lake surface while going 5m/s and subsequently slides into a stationary child 2. They remain linked together after the collision.
Collision 2:
Child 1 and child 2 are sliding in the same direction. Child 2, moving at 10m/s, slides into child 1, moving at 2m/s.
Collision 3:
The two children collide while traveling in opposite directions at 10m/s each.
Collision 4:
The two children push off from one another’s back, and begin moving in exactly opposite directions. Child 2 moves with a velocity of +8m/s.
Child 1 hooks up a jet motor to a sled, and brings it to the icy lake. She sets up her sled, and launches from a velocity of +8 m/s with an acceleration of 15m/s2. After ten seconds, how fast is she traveling? Assume the lake is frictionless.
Two children are playing on an icy lake. Child 1 weighs 50kg, and child 2 weighs 38kg. Child 1 has a backpack that weighs 10kg, and child 2 has a backpack that weighs 5kg.
Over the course of the afternoon, they collide many times. Four collisions are described below.
Collision 1:
Child 1 starts from the top of a ramp, and after going down, reaches the lake surface while going 5m/s and subsequently slides into a stationary child 2. They remain linked together after the collision.
Collision 2:
Child 1 and child 2 are sliding in the same direction. Child 2, moving at 10m/s, slides into child 1, moving at 2m/s.
Collision 3:
The two children collide while traveling in opposite directions at 10m/s each.
Collision 4:
The two children push off from one another’s back, and begin moving in exactly opposite directions. Child 2 moves with a velocity of +8m/s.
Child 1 hooks up a jet motor to a sled, and brings it to the icy lake. She sets up her sled, and launches from a velocity of +8 m/s with an acceleration of 15m/s2. After ten seconds, how fast is she traveling? Assume the lake is frictionless.
Tap to reveal answer
For this question, we have to use the translational motion equations:
For this question, we have to use the translational motion equations:
← Didn't Know|Knew It →
Two children are playing on an icy lake. Child 1 weighs 50kg, and child 2 weighs 38kg. Child 1 has a backpack that weighs 10kg, and child 2 has a backpack that weighs 5kg.
Over the course of the afternoon, they collide many times. Four collisions are described below.
Collision 1:
Child 1 starts from the top of a ramp, and after going down, reaches the lake surface while going 5m/s and subsequently slides into a stationary child 2. They remain linked together after the collision.
Collision 2:
Child 1 and child 2 are sliding in the same direction. Child 2, moving at 10m/s, slides into child 1, moving at 2m/s.
Collision 3:
The two children collide while traveling in opposite directions at 10m/s each.
Collision 4:
The two children push off from one another’s back, and begin moving in exactly opposite directions. Child 2 moves with a velocity of +8m/s.
Child 1 hooks up a jet motor to a sled, and brings it to the icy lake. She sets up her sled, and launches from a velocity of 8m/s with an acceleration of 15m/s2. After fifteen seconds, how far has she traveled?
Two children are playing on an icy lake. Child 1 weighs 50kg, and child 2 weighs 38kg. Child 1 has a backpack that weighs 10kg, and child 2 has a backpack that weighs 5kg.
Over the course of the afternoon, they collide many times. Four collisions are described below.
Collision 1:
Child 1 starts from the top of a ramp, and after going down, reaches the lake surface while going 5m/s and subsequently slides into a stationary child 2. They remain linked together after the collision.
Collision 2:
Child 1 and child 2 are sliding in the same direction. Child 2, moving at 10m/s, slides into child 1, moving at 2m/s.
Collision 3:
The two children collide while traveling in opposite directions at 10m/s each.
Collision 4:
The two children push off from one another’s back, and begin moving in exactly opposite directions. Child 2 moves with a velocity of +8m/s.
Child 1 hooks up a jet motor to a sled, and brings it to the icy lake. She sets up her sled, and launches from a velocity of 8m/s with an acceleration of 15m/s2. After fifteen seconds, how far has she traveled?
Tap to reveal answer
For this question, we have to use a translational motion equation.
For this question, we have to use a translational motion equation.
← Didn't Know|Knew It →
A 2kg mass is suspended on a rope that wraps around a frictionless pulley attached to the ceiling with a mass of 0.01kg and a radius of 0.25m. The other end of the rope is attached to a massless suspended platform, upon which 0.5kg weights may be placed. While the system is initially at equilibrium, the rope is later cut above the weight, and the platform subsequently raised by pulling on the rope.
The rope is cut right above the 2 kgmass. What is the acceleration of the platform with the individual weights as it falls to the ground?
A 2kg mass is suspended on a rope that wraps around a frictionless pulley attached to the ceiling with a mass of 0.01kg and a radius of 0.25m. The other end of the rope is attached to a massless suspended platform, upon which 0.5kg weights may be placed. While the system is initially at equilibrium, the rope is later cut above the weight, and the platform subsequently raised by pulling on the rope.
The rope is cut right above the 2 kgmass. What is the acceleration of the platform with the individual weights as it falls to the ground?
Tap to reveal answer
Remember that Newton’s second law is applicable regardless of whether we are talking about kinematics, torque, electric, magnetic, or gravitational force, thus, F = ma. We know that the only force acting in free-fall in an environment where we can neglect air resistance (i.e. most of the problems on the MCAT) is gravity. The acceleration due to gravity is 9.8m/s2. The sign could be + or – depending on how you decided to orient.
Remember that Newton’s second law is applicable regardless of whether we are talking about kinematics, torque, electric, magnetic, or gravitational force, thus, F = ma. We know that the only force acting in free-fall in an environment where we can neglect air resistance (i.e. most of the problems on the MCAT) is gravity. The acceleration due to gravity is 9.8m/s2. The sign could be + or – depending on how you decided to orient.
← Didn't Know|Knew It →
A 2kg mass is suspended on a rope that wraps around a frictionless pulley. The pulley is attached to the ceiling and has a mass of 0.01kg and a radius of 0.25m. The other end of the rope is attached to a massless suspended platform, upon which 0.5kg weights may be placed. While the system is initially at equilibrium, the rope is later cut above the weight, and the platform subsequently raised by pulling on the rope.
What is the velocity of the platform two seconds after the rope is cut?
A 2kg mass is suspended on a rope that wraps around a frictionless pulley. The pulley is attached to the ceiling and has a mass of 0.01kg and a radius of 0.25m. The other end of the rope is attached to a massless suspended platform, upon which 0.5kg weights may be placed. While the system is initially at equilibrium, the rope is later cut above the weight, and the platform subsequently raised by pulling on the rope.
What is the velocity of the platform two seconds after the rope is cut?
Tap to reveal answer
Think back to the 3 main kinematics equations that we know.
vf2 = vi2 + 2aΔx
vf = vi + at
Δx = vit + ½at2
We need to determine which formula will allow us to find final velocity after a given amount of time.
vf = vi + at = (0m/s) + (9.8m/s2)(2s) = 19.6m/s
Think back to the 3 main kinematics equations that we know.
vf2 = vi2 + 2aΔx
vf = vi + at
Δx = vit + ½at2
We need to determine which formula will allow us to find final velocity after a given amount of time.
vf = vi + at = (0m/s) + (9.8m/s2)(2s) = 19.6m/s
← Didn't Know|Knew It →
If a ball is thrown straight up into the air at a velocity of 20m/s and strikes the ground five seconds later, what is the velocity of the ball at its maximum height?
If a ball is thrown straight up into the air at a velocity of 20m/s and strikes the ground five seconds later, what is the velocity of the ball at its maximum height?
Tap to reveal answer
The velocity of the ball at the maximum height is equal to zero. Since the ball was thrown stright up, both the velocity in the x direction and the y direction are equal to zero at its peak. If the ball were thrown at an angle, only the velocity in the y direction would be equal to zero. This is a good point to keep in mind when doing kinematic problems. Note that there is still acceleration acting on the ball (gravity) of 10m/s2 which brings the ball back to the ground.
The velocity of the ball at the maximum height is equal to zero. Since the ball was thrown stright up, both the velocity in the x direction and the y direction are equal to zero at its peak. If the ball were thrown at an angle, only the velocity in the y direction would be equal to zero. This is a good point to keep in mind when doing kinematic problems. Note that there is still acceleration acting on the ball (gravity) of 10m/s2 which brings the ball back to the ground.
← Didn't Know|Knew It →
If an object has an initial velocity of 3m/s and a constant acceleration of 2m/s2, how fast will the object be moving after five seconds?
If an object has an initial velocity of 3m/s and a constant acceleration of 2m/s2, how fast will the object be moving after five seconds?
Tap to reveal answer
Using the equation 
we can find the final velocity of the object after five seconds.
Using the equation
← Didn't Know|Knew It →
How far will an object travel after ten seconds if it is dropped into a bottomless pit?
How far will an object travel after ten seconds if it is dropped into a bottomless pit?
Tap to reveal answer
Since the object is dropped, the inital velocity is zero. Gravity is the only acceleration, the time is ten seconds, and the distance at which the object travels is unknown.
The equation 
can be used to find the distance traveled.
Since the object is dropped, the inital velocity is zero. Gravity is the only acceleration, the time is ten seconds, and the distance at which the object travels is unknown.
The equation
← Didn't Know|Knew It →
A sports car has a mass of 
. What must its acceleration be to generate 
over a distance of 
?
A sports car has a mass of
Tap to reveal answer
This question will require us to deal with work and force.
We are given the mass of the car, the work energy generated, and the distance. Using these values, we can solve for the acceleration.
This question will require us to deal with work and force.
We are given the mass of the car, the work energy generated, and the distance. Using these values, we can solve for the acceleration.
← Didn't Know|Knew It →
In five seconds a runner moves from the 50m mark to the 75m mark along a straight path. What is the runner's average velocity?
In five seconds a runner moves from the 50m mark to the 75m mark along a straight path. What is the runner's average velocity?
Tap to reveal answer
To find the average velocity, the displacement needs to be measured. The displacement the difference betweent eh final position and the initial position.
Using the equation for velocity, 
, we can find the average velocity.
To find the average velocity, the displacement needs to be measured. The displacement the difference betweent eh final position and the initial position.
Using the equation for velocity,
← Didn't Know|Knew It →
How long does it take an object to travel a distance of 30m from rest at a constant acceleration of 2m/s2?
How long does it take an object to travel a distance of 30m from rest at a constant acceleration of 2m/s2?
Tap to reveal answer
Using the equation 
, we can solve for time.
Since the object started at rest, 
. Now we are left with the equation 
.
Plugging in the remaining values we can find that t = 5.5s.
Using the equation
Since the object started at rest,
Plugging in the remaining values we can find that t = 5.5s.
← Didn't Know|Knew It →
A child throws a ball straight up into the air. He throws the ball with an initial velocity of 
. Assume there is no air resistance.
How long will it take for the ball to reach a velocity of 
, while in the air?
A child throws a ball straight up into the air. He throws the ball with an initial velocity of
How long will it take for the ball to reach a velocity of
Tap to reveal answer
In order to solve for the time at which the ball has a velocity of 
, we need to use an equation which incorporates all of the known variables. We know the acceleration due to gravity, the initial velocity, and the final velocity. As a result, the best equation to use is the one that allows us to simply solve for the unknown variable, time.
Keep in mind that 1.6s is also a time at which the velocity is 
, but this time refers to the point when the boy catches the ball. The question asks for the specific time while the ball is still in the air, so the correct answer, 0.8s, refers to the point where the ball is at its peak height.
In order to solve for the time at which the ball has a velocity of
Keep in mind that 1.6s is also a time at which the velocity is
← Didn't Know|Knew It →
If an ball is dropped from a cliff 
high, how long will it take the ball to strike the ground?
If an ball is dropped from a cliff
Tap to reveal answer
Since acceleration is constant, we can use the appropriate kinematics equation to solve:
We are given the height of the cliff, which will be equal to the distance traveled. The initial velocity is zero since the ball starts from rest and the acceleration will be equal to the acceleration due to gravity. Use these values to calculate the time.
Since acceleration is constant, we can use the appropriate kinematics equation to solve:
We are given the height of the cliff, which will be equal to the distance traveled. The initial velocity is zero since the ball starts from rest and the acceleration will be equal to the acceleration due to gravity. Use these values to calculate the time.
← Didn't Know|Knew It →
A sprinter running a 
race accelerates constantly at 
from rest. What is his approximate final velocity as he crosses the finish line?
A sprinter running a
Tap to reveal answer
To answer this question, we must have a solid understanding of the kinematics equations. For this question, we must use an equation relating final velocity, distance, and acceleration.
The best fit for this is 
.
Since we are solving for final velocity, and we started from rest, we can simplify the equation.
To answer this question, we must have a solid understanding of the kinematics equations. For this question, we must use an equation relating final velocity, distance, and acceleration.
The best fit for this is
Since we are solving for final velocity, and we started from rest, we can simplify the equation.
← Didn't Know|Knew It →
An car accelerates from rest and travels 
in 
. What is the approximate acceleration of the car?
An car accelerates from rest and travels
Tap to reveal answer
The kinematics equation relating distance, time, and acceleration is 
.
Since we know that the car was initially at rest, we can rewrite the equation with zero initial velocity.
Now we can plug in our values from the question, and solve for the acceleration.
The kinematics equation relating distance, time, and acceleration is
Since we know that the car was initially at rest, we can rewrite the equation with zero initial velocity.
Now we can plug in our values from the question, and solve for the acceleration.
← Didn't Know|Knew It →